2025 Loftness Battle Ax® – H Series 84BH

2025 Loftness Battle Ax® – H Series 84BH

The Loftness® Battle Ax H Series isn’t your average mulching head. It offers heavy-duty construction engineered especially for prime movers with 50-150 horsepower. Of course, it also features our popular Battle Ax rotor design with depth gauges and a two-stage cutting chamber for exceptional mulching performance.

The Battle Ax comes standard with a 2-year warranty. Simply purchase an H Series, and you’ll be automatically enrolled in a warranty that’s twice as long as most others are willing to offer.

Our exclusive two-stage cutting chamber provides the ability to cut material twice, which is why Loftness machines are known to process material more thoroughly than competitive units. Material is first cut against the primary shear bar, which is adjustable, so the clearance can be narrowed or widened depending upon the desired material size and production rate. From there, the partially reduced material passes smoothly to the secondary cutting chamber behind the front bumper, where it’s processed further before being discharged toward the ground.

Less stalling. Shorter recovery times. The H Series comes standard with a V-Drive variable-displacement piston motor, which automatically shifts the rotor RPM from the highest speed to a lower range for increased torque, as needed, for maximum jobsite performance.

It doesn’t get any easier to reverse or replace teeth. All you need to do is remove one hex bolt.

A specialized staggered/spiral tooth pattern ensures single-tooth contact with the work surface at all times while maintaining optimal rotor balance.

Nobody likes removing vines or other debris that’s wrapped around the rotor bearings. Our specialized anti-wrap rings keep this to a minimum.

Features may include:

• The Battle Ax rotor design uses built-in depth gauges to control cutting depth, like raker teeth on a chainsaw.

• Two shear bars allow the Battle Ax to produce a finer mulch with fewer passes. The primary shear bar is adjustable for controlling particle sizes. The secondary shear bar is replaceable.

• The cutting teeth are mounted to the rotor with a single bolt. They can be easily reversed, replaced or removed on the jobsite using a common hex socket.

• The V-Drive uses a variable-displacement piston motor, which automatically shifts the rotor RPM from the highest speed to a lower range for increased torque, as needed. The result is less stalling and a shorter recovery time, helping operators to concentrate on the job instead of power settings and continuous head repositioning. This motor provides a more effective use of power as the head RPM increases under lighter loads, allowing operators to quickly slice through smaller or more flexible growth, as well as when back-dragging material on the ground. As larger trees, trunks and stumps are engaged, the motor increases the drive displacement to increase torque.

• The positive drive, cog belt and sprocket design maximizes efficiency and requires less maintenance than other drive types.

• Rotor ends are machine turned to mate with close tolerance, machined anti-wrap rings, which minimize debris in the bearing chamber.