Current ICS® Pipe-Cutting 695XL PG Gas Power Cutter

2020 ICS® 695XL PG Gas Power Cutter Base

2020 ICS® 695XL PG Gas Power Cutter Base

Swipe to View More

  • Year 2020
  • Make ICS®
  • Model 695XL PG Gas Power Cutter
Shop ICS® Pre-Owned
Product Details Specifications Photos
2020 ICS® 695XL PG Gas Power Cutter Base

2020 ICS® 695XL PG Gas Power Cutter Base

  • Year 2020
  • Manufacturer ICS®
  • Model Name 695XL PG Gas Power Cutter
  • Trim Name Base
  • Generic Type (Primary) General
  • Engine Power 4.8kW (6.4 hp) @ 9000 rpm
  • Engine Torque 5.7 Nm (50.4 in-lbs) @ 7200 rpm
  • Rated Engine Speed 9,300 +/- 150 rpm (max)/2,700 +/- 100 rpm (idle)
  • Displacement 94cc (5.7 cu-in)
  • Engine Type 2-stroke
  • Cooling Air Cooled
  • Starter Recoil, dust and water resistant
  • Ignition Special water resistant electronic ignition

2020 ICS® 695XL PG Gas Power Cutter

The new 695XL features an easy-to-start engine with a higher energy ignition system and durable, long-lasting components including a new muffler, carburetor, and piston and cylinder.

Based on the best-selling 695 saw platform, the 695XL is the highest horsepower ICS gas power cutter for frequent-use by general construction, utility contractors, and concrete professionals.

Available with 12 in. (30 cm), 16 in. (40cm) guide bars and the entire line of FORCE3®, FORCE4®, and PowerGrit®Series diamond chains.

This product can expose you to chemicals, including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Features may include:

  • Use on concrete, stone, masonry, ductile iron pipe, cast iron pipe, and more
  • Most versatile gas power cutter
  • New piston and cylinder lowers engine temperature
  • Better operator control
  • Longer life muffler with reinforced internal baffle
  • Easy-to-start with higher energy ignition system
  • New easy-to-tune carburetor

Engine

Engine Power 4.8kW (6.4 hp) @ 9000 rpm
Engine Torque 5.7 Nm (50.4 in-lbs) @ 7200 rpm
Rated Engine Speed 9,300 +/- 150 rpm (max)/2,700 +/- 100 rpm (idle)
Displacement 94cc (5.7 cu-in)
Engine Type 2-stroke
Cooling Air Cooled
Starter Recoil, dust and water resistant
Ignition Special water resistant electronic ignition

Fuel Usage

Fuel Usage, 100% Load Fuel ratio: 2% (50:1) gasoline-to-oil

Operational

Operating Speed Chain at Maximum Power: 28 m/s (5500 ft /min)
Maximum Pressure Water Supply Requirement - Minimum: 1.5 bar (20 psi)
Hydraulic Flow Water Flow Requirement - Minimum: 1.5 bar (20 psi)
Operating Conditions Vibration, ahv eq Concrete Cutting (2): 3.6 m/s2 (K=1.0 m/s2) Front Handle/3.1 m/s2 (K=1.0 m/s2) Rear Handle Vibration, ahv eq Pipe Cutting (2) 5.62 m/s (K=0.2 m/s2) Front Handle/5.28 m/s2 (K=0.2 m/s2) Rear Handle | Vibration, ahv eq Pipe Cutting (2): 5.62 m/s (K=0.2 m/s2) Front Handle/5.28 m/s2 (K=0.2 m/s2) Rear Handle

Performance

Noise Level Equivalent Sound Pressure at the Operator's Ear Lwa: 104.6 dB(A) (K=1.0 dB(A)) | Guaranteed Sound Power Level, Lwa (1): 115 dB(A); (Kwa=1.0 dB(A))

Dimensions

Length 46 cm (18")
Height 36cm (14")
Width 30cm (12")

Capacities

Fuel Capacity 1 liter (0.26 gallon)

Weights

Weight 9.5 kg (21 lbs) powerhead only

Product Photography