Current ICS® Concrete-Cutting 680ES Gas Power Cutter

2020 ICS® 680ES Gas Power Cutter Base

2020 ICS® 680ES Gas Power Cutter Base

Swipe to View More

  • Year 2020
  • Make ICS®
  • Model 680ES Gas Power Cutter
Shop ICS® Pre-Owned
Product Details Specifications Photos
2020 ICS® 680ES Gas Power Cutter Base

2020 ICS® 680ES Gas Power Cutter Base

  • Year 2020
  • Manufacturer ICS®
  • Model Name 680ES Gas Power Cutter
  • Trim Name Base
  • Generic Type (Primary) General
  • Engine Power 3.7 kW (5 hp) @ 9,500 rpm
  • Engine Torque 4.1 Nm (36.3 in-lbs) @ 6,500 rpm
  • Engine Type 2-stroke
  • Displacement 76.5 cc (4.7 cu-in)
  • Rated Engine Speed 11500 +/- 500 rpm (max) / 2,800 - 3,200 rpm (Idle)
  • Cooling Air Cooled
  • Starter Dust and water resistant
  • Ignition Special water resistant electronic ignition

2020 ICS® 680ES Gas Power Cutter

Built to meet the operation and flexibility demands of the general construction user, the 680ES stands alone in terms of reliability and value.

Easy to start with a new multifunction lever to control choke, run, and stop functions.

The powerhead houses specially designed carburetion and ignition systems that work together for easy starting, cooler operation, and dependable performance at just about any elevation.

Available with 12 in. (30 cm) and 14 in. (35 cm) guide bars and the entire line of FORCE3® Series diamond chain.

This product can expose you to chemicals, including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Features may include:

  • Polyester air filter designed specifically for wet cutting
  • Operates FORCE3™ diamond chain consumables up to 14 in. (35cm)
  • Multifunction lever controls choke, throttle advance, run and stop modes
  • Extended drive sprocket adapter offers easy chain assembly
  • Deep cutting solution for obstructed or small openings
  • Cut squares as small as 4 in. x 4 in. (10 cm x 10 cm)
  • Easy-to-start in all weather

Engine

Engine Power 3.7 kW (5 hp) @ 9,500 rpm
Engine Torque 4.1 Nm (36.3 in-lbs) @ 6,500 rpm
Engine Type 2-stroke
Displacement 76.5 cc (4.7 cu-in)
Rated Engine Speed 11500 +/- 500 rpm (max) / 2,800 - 3,200 rpm (Idle)
Cooling Air Cooled
Starter Dust and water resistant
Ignition Special water resistant electronic ignition

Fuel Usage

Fuel Usage, 100% Load 2% (50:1) gasoline-to-oil

Operational

Maximum Pressure Water Supply Requirement: Minimum: 1.5 bar (20 psi)
Hydraulic Flow Water Flow Requirement: Minimum: 4 lpm (1 gpm)
Operating Speed Chain at Maximum Power: 34.5 m/s (6800 ft /min)
Operating Conditions Vibration, ahv eq Concrete Cutting (2): 7.2 m/s2 (K=1.0 m/s2) Front Handle/8.5 m/s2 (K=1.0 m/s2) Rear Handle

Performance

Noise Level Equivalent Sound Pressure at the Operator's Ear Lwa: 101.0 dB(A) (K = 2.0 dB(A)) | Guaranteed Sound Power Level, Lwa (1): 117 dB(A) (Kwa=3.0 dB(A))

Dimensions

Length 46 cm (18 in)
Height 29 cm (11.5 in)
Width 25 cm (10 in)

Capacities

Fuel Capacity 0.88 liter (0.23 gallon)

Weights

Weight 9.5 kg (21 lbs)

Product Photography