2020 Heat Wagon Direct Fired Heaters 4210

2020 Heat Wagon Direct Fired Heaters 4210

Swipe to View More

  • Year 2020
  • Make Heat Wagon
  • Model Direct Fired Heaters
2020 Heat Wagon Direct Fired Heaters 4210

2020 Heat Wagon Direct Fired Heaters 4210

2020 Heat Wagon Direct Fired Heaters 4210

Features may include:

  • Safe fuel shutdown if combustion air is interrupted
  • May be ducted up to 400 feet

The T3 Post Driver is a small driver that delivers big time results! The T3 Driver will drive T-posts up to a 3" O.D. (outside diameter) pipe at a rate of up to six strikes per second. The top of the post is fully contained to prevent kick out and protected from damage by the strike plate. Use your tractor, skid-steer, mini-ex, loader, or backhoe to carry the weight of the driver. We offer several mounting options, including an offset skid-steer quick attach which allows the operator to drive parallel to the fence line, a bolt-on/weld-on bracket that mounts to almost any flat surface, and a tilt bracket for up to 20° adjustments left or right. Use down pressure from the host vehicle to drive more posts in the ground faster. The T3 Driver includes one bolt-on/weld-on bracket, hoses and flat face ISO couplers for simple plug and play operation. This is an ideal post driver for most farmers, ranchers, fencing contractors, and rental yards.

  • Safe monitoring of combustion, two trial electronic ignition with 20 second pre-purge time delay and 7 second shutdown
  • Direct wire with easy, safe 100% power shut off

  • Protects heater by shutting down if unit is being overfired (high limit)
  • Protects heater by shutting down if voltage is too low

  • Easy monitoring of control voltage to ensure trouble-free operation
  • Automatically cycles the heater hi/low

  • Indoor/outdoor usage

Engine

Fuel Type Vapor Propane / Liquid propane / Natural Gas
Engine Power Fan: 10HP

Electric

Electrical 240V 1Ø 60A / 240V 3Ø 40A

Operational

Operating Conditions Input: 5,000,000 BTU/H | Fuel Consumption: 54.6 GPH LP / 5000 CFH NG | 27,500 CFM

Hydraulics

Maximum Pressure Inlet: Min-30psi / Max-250psi | Manifold: 15 psi

Dimensions

Dimensions Temp Rise: 200 degrees
Length 99"
Width 64"
Height 78"

Weights

Weight 1,140 lbs.

Features

Features Gas Connection: 1/2” NPT | Thermostat: High – Low

Product Photography