2025 Generac Power Systems Diesel Mobile Generator | 20kVA / 16kW MLG20IF4
- Year 2025
- Make Generac Power Systems
- Model Diesel Mobile Generator | 20kVA / 16kW
- Engine Model: 4LE2TAG
2025 Generac Power Systems Diesel Mobile Generator | 20kVA / 16kW MLG20IF4
Features may include:
Affordable, Reliable, Mobile Power- The MLG20IF4 diesel generator provides affordable, single phase power with just the right combination of hardworking output and efficiency.
- Generac Mobile recognizes environmental responsibility and continues to meet emission regulations with the addition of their Interim & Tier 4 Generator line. The MLG15M generator is powered by a Mitsubishi diesel engine. Proven power you can trust, while maximizing fuel efficiency and high performance.
- Full tubular steel frame, with lockable enclosure
- Durable, fade resistant, white baked on powder coat finish
- Stainless steel hinges, exterior hardware and pad lockable door latches
- CSA Certified
- Key switch to preheat (glow plug), start & stop
- Automatic low oil level / high temp shutdown alerts
- 70A Start limit main breaker
- 2 year - 2,000 hour warranty
- Marathon voltage regulation within +/- 1%
Engine
Engine Manufacturer
Isuzu
Engine
Model: 4LE2TAG
Emissions
EPA Compliance: Tier IV Final
Cylinder Liners
4
Engine Type
Inline
Displacement
133 in3 (2.2L L)
Bore
3.35 in (85 mm)
Stroke
3.78 in (96 mm)
Compression Ratio
TBD
Aspiration
Turbocharged
Cooling
Water Jacket
Fuel System
Fuel Type
Ultra-Low Sulfur Diesel
Drivetrain
Governor
Electric | Frequency Regulation (Steady State): 5%
Operational
Fan Speed
1,800 RPM
Battery
Battery
Size: 440 CCA
Battery Charger Type
60A
Electric
Electrical
System Voltage: 12 VDC | Ground Polarity: Negative (-) | Voltage Regulator Type: AVR | Regulation Accuracy (Steady State): ± 1%
Alternator
Model: Marathon Electric 334CSA3028 | Poles: 4 | Field Type: Rotating | Insulation Class Rotor/Stator: H | Total Harmonic Distortion: <5% | Standard Excitation: Brushless | Bearings: Single Bearing, Double Shielded
Hydraulics
Oil Filter
Type: Spin On
Pump Type
Oil: Gear | Water: Belt Driven | Fuel: Gear
Dimensions
Fan Diameter
20.0 in (508 mm)
Dimensions
Fuel Supply/Return Line Diameter: 0.313 in (7.9 mm)
Capacities
Features
Crankcase Capacity: 8.0 qt (7.6 L)
Cooling System
12.0 qt (11.3 L)
Features
Features
Fan Type: Blower | Injector Type: Direct