2020 E-Z Drill Inc. Single Drills 240B SRA Vertical
- Year 2020
- Make E-Z Drill Inc.
- Model Single Drills
2020 E-Z Drill Inc. Single Drills 240B SRA Vertical
2020 E-Z Drill Inc. Single Drills 240B SRA Vertical
Eliminate the need for a separate drilling system with the 240B SRA slab rider combo drill, which you can convert from a rock drill to a core drill with a bit guide and motor change. You can drill 5/8- to 2-1/2-inch holes to 18 inches deep with exceptional accuracy and without disturbing the subgrade. The fully pneumatic 240B SRA core drill uses a three-speed motor and requires just 77 cfm to operate, while the rock drill configuration requires 100 cfm.
Motor
Motor Power
Air: 2.1 HP (1.6 kW)
Operational
Operating Conditions
Air Consumption (minimum): 100 cfm (2.8 m 3 /min) | Impact: 36 ft. lbs (49 blow ) | Air Consumption (minimum): 77 cfm (2.2 m 3 /min)
Operating Speed
Hammer: 2200 bpm | 288 rpm | 3 – speed: 400 rpm, 900 rpm, 1600 rpm
Hydraulics
Maximum Pressure
Operating: 90 psi (6.2 bar)
Dimensions
Dimensions
Drill Distance From Ground: up to 12 in (30.5 cm) | Drill Bit Diameter: 5/8 in to 2 in (15.9 mm to 50.8 mm) | Chuck Size (std.): 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm) | Bit Connection: 1 1/4 in x 7 in UNC
Depth, Maximum
Drill: 18 in (45.7 cm)
Length
Cart: 48 in (121.9 cm)
Overall Length
67 1/2 in (171.5 cm)
Wheelbase
42 in (106.7 cm)
Width
32 in (81.3 cm)
Weights
Weight
385 lbs (174.8 kg) | Drill Motor: 54 lbs (24.5 kg) | Drill Motor: 18 lbs (8 kg)
Features
Features
Rock Drill Motor (pneumatic): CP 32A