2020 E-Z Drill Inc. Single Drills 210B SRA Horizontal
- Year 2020
- Make E-Z Drill Inc.
- Model Single Drills
2020 E-Z Drill Inc. Single Drills 210B SRA Horizontal
2020 E-Z Drill Inc. Single Drills 210B SRA Horizontal
With the 240B combo drill, you can switch between rock drilling and core drilling with a bit guide and motor change for greater versatility on jobsites. Use it to drill within a 4-foot patch, and core and drill 5/8- to 2-1/2-inch-diameter holes to 18 inches deep. The fully pneumatic drill can operate at three speeds – 400, 900 and 1,600 rpm – and requires a minimum of 77 cfm. The rock drill configuration requires 100 cfm. Both rock and core drill motors and bit guides are included with the 240B drill.
Operational
Operating Conditions
Air Consumption (minimum): 100 cfm (2.8 m 3 /min)
Hydraulics
Maximum Pressure
90 psi (6.2 bar)
Dimensions
Dimensions
Drill Distance From Corner: 6 in (15.2 cm) | Drill Distance From Ground: 3 in (7.6 cm) | Drill Bit Diameter: 5/8 in to 2 1/2 in (15.9 mm to 63.5 mm) | Chuck Size (std.): 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm)
Depth, Maximum
Drill: 18 in (45.7 cm)
Length
Lower: 46 in (116.8 cm) | Cart: 48 in (121.9 cm)
Overall Length
94 in (238.8 cm)
Wheelbase
42 in (106.7 cm)
Width
32 in (81.3 cm)
Height
32 in (81.3 cm)
Weights
Weight
385 lbs (174.8 kg) | Drill Motor: 54 lbs (24.5 kg)
Features
Features
Drill Motor (pneumatic): CP 32A