2025 Takeuchi Wheel Loader TW60 Series 2

Information

2025 Takeuchi Wheel Loader TW60 Series 2

Compact and nimble, the TW60 Series 2 is well equipped to handle a wide range of jobs and attachments. A universal hydraulic skid steer coupler enables the TW60 Series 2 to utilize a wide range of skid steer attachments, and it is easily controlled from the operator’s station. The quiet and turbocharged engine is equipped with a DOC/DPF exhaust aftertreatment system and produces 61 horsepower (45.6 kW) for excellent power and performance around the job site. 100% locking differentials can be engaged at low speeds allowing the operator to work in varied terrain and extreme conditions. Daily maintenance and inspections are simple to perform on the TW60 Series 2 due to the engine hood that opens overhead providing access to key inspection points and grease points that are easily accessed on the loader and articulation points.

Features may include:

Z-Bar Loader Linkage
  • Greater bucket breakout and lift arm forces – excels in grading and dirt work applications.
  • Higher hinge-pin heights – ideal for loading dump trucks over the side.
Center Pin Oscillation
  • 12 degrees of oscillation keeps the operators station stable while the working equipment oscillates.

Photos

Highlights

  • Des Moines, Iowa
  • 2025
  • Takeuchi
  • Wheel Loader TW60 Series 2
  • Available
  • Recommended Bucket: 76.5 in
  • Dump Fully Raised: 7 ft 5.0 in | Bucket Clearance: 9 ft 8.7 in

    • Specifications

    • 2025
    • Takeuchi
    • Wheel Loader
    • TW60 Series 2
    • Compact
    • Yanmar 4TNV86CHT-MAW
    • Horsepower @ 2,800 rpm: 61.2 hp
    • Maximum @ 1,800 rpm: 146.0 ft-lb
    • 128.0 cu in
    • 8.9 qt
    • Max. Reach Fully Raised: 26.4 in | Dump Angle: 46° | Rollback Angle: 43°
    • Max. to Bucket Pin: 10 ft 9.7 in
    • Dump Fully Raised: 7 ft 5.0 in | Bucket Clearance: 9 ft 8.7 in
    • with Bucket: 17 ft 7.1 in
    • 8 ft 6.4 in | Operating: 12 ft 4.3 in
    • 6 ft 6.7 in
    • 20.5 in
    • without Bucket: 6 ft 3.0 in
    • 12 ft 1.3 in
    • Inside: 6 ft 5.3 in
    • Recommended Bucket: 76.5 in
    • Tipping, Straight: 6,689 lb | Tipping, Full Turn: 5,906 lb
    • Tank: 16.2 gal
    • Reservoir: 10.8 gal
    • 7.8 qt | Front Axle: 4.9 qt | Rear Axle: 4.6 qt
    • Operating: 10,692 lb | Operating Capacity, SAE J818*: 2,953 lb

    Disclaimer

    Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Pricing subject to change without notice. Contact dealer for details.