2020 Mustang Vertical Skid Steer Loaders 3300V NXT2

Information

2020 Mustang Vertical Skid Steer Loaders 3300V NXT2

Features may include:

Performance

The 3300V NXT2 skid steer loader is a shining example of Mustang's superior innovation and well thought-out product development.

Emissions certified Tier IV engines combine power and efficiency.

Self leveling lift action for better control of lifting loads.

The new chassis aids in superior weight distribution, which further enhances stability. New rear bumper provides additional protection and towing capability.

Thick steel plating and heavy-duty pins and bushings make this loader stronger than any other machine in its class.

A heavily constructed vertical-lift boom provides substantial forward reach at trailer loading and dumping heights.

Electronic engine control and foot throttle allow operation at part throttle, reducing sound levels and fuel consumption.

Operator's Cab

The operator’s compartment on the 3300V NXT2 skid steer loader provides a safe and comfortable working environment for operators of all sizes.

Cab forward design enhances the view to the bucket. Level II FOPS is standard equipment.

New side-folding restraint bar and armrests with multiple adjustments enhance operator safety and comfort.

Fully adjustable controls and an optional air-ride seat deliver outstanding comfort.

Extra-large side screens combined with a low-profile lift arm design provide a wide field-of-view to the side work areas.

Controls

Controls on the Mustang 3300V NXT2 skid steer loader are ergonomically designed to reduce operator fatigue and increase productivity.

T-Bar and dual-hand controls are now available.

Adjustable joystick handles provide for ease of operator control with minimal of effort, to reduce fatigue.

New upper-left and upper-right instrument panels provide easy readout and switch access.

Pilot joystick controls or pilot hand/foot controls provide the ultimate in operator comfort, ease and controllability.

Photos

Highlights

  • Des Moines, Iowa
  • 2020
  • Mustang
  • Vertical Skid Steer Loaders 3300V NXT2
  • Available
  • Bucket: 74" (1880 mm)
  • to Hinge Pin - Fully Raised: 131.2" (3332 mm) | Dump Reach at Full Height: 32" (813 mm) | Rollback at Full Height: 94° | Dump Height: 98.5" (2502 mm)

    • Specifications

    • 2020
    • Mustang
    • Vertical Skid Steer Loaders
    • 3300V NXT2
    • General
    • Yanmar
    • 4TNV98CT-NMS Tier IV
    • Net Power (kW): 70.7 hp (52.7) | Gross Power (kW): 72 hp (53.7)
    • RPM for Optimal Power: 2500 rpm
    • 203 cu.in. (3.3 L)
    • 14.00-17.5 HD
    • 14.00-17.5 HD
    • Travel Speed - Maximum: 8.1 mph (13 km/hr)
    • Auxiliary Hydraulics - Standard: 23.5 gpm (89 L/min)
    • Filtration: 3,200 psi (220.6)
    • Rollback at Ground Level: 29° | Dump Angle: 42° | Clearance Circle - Rear: 69.5" (1765 mm) | Clearance Circle - Front w/o Bucket: 56" (1422 mm) | Clearance Circle - Front w/Bucket: 94.5" (2400 mm) | Departure Angle: 25°
    • Overall Operating Height - Fully Raised: 172" (4369 mm) | to top of ROPS: 82" (2085 mm)
    • to Hinge Pin - Fully Raised: 131.2" (3332 mm) | Dump Reach at Full Height: 32" (813 mm) | Rollback at Full Height: 94° | Dump Height: 98.5" (2502 mm)
    • to Chassis: 9.0" (229 mm)
    • with Bucket: 152.5" (3874 mm) | without Bucket: 119" (3023 mm)
    • 49.5" (1257 mm)
    • 72" (1829 mm)
    • Bucket: 74" (1880 mm)
    • Seat to Ground Height: 41" (1041 mm)
    • Reservoir: 10.5 gal. (40 L)
    • Rated Operating Capacity: 3,300 lbs. (1497 kg)
    • Tank: 24.5 gal. (72.7 L)
    • Approximate: 9090 lbs. (4123 kg)

    Disclaimer

    Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Pricing subject to change without notice. Contact dealer for details.