2020 Mustang Vertical Skid Steer Loaders 2700V NXT2

Information

2020 Mustang Vertical Skid Steer Loaders 2700V NXT2

Features may include:

Performance

The 2700V NXT2 Skid Steer Loader is a product of superior innovation and well thought-out product development.

Emissions certified Tier IV engines combine power and efficiency.

Self leveling lift action for better control of lifting loads.

The chassis aids in superior weight distribution, which further enhances stability.

Thick steel plating and heavy-duty pins and bushings make this loader stronger than any other machine in its class.

A heavily constructed vertical-lift boom provides substantial forward reach at trailer loading and dumping heights.

Electronic engine control and foot throttle allow operation at part throttle, reducing sound levels and fuel consumption.

Operator's Cab

The spacious operator’s compartment on the 2700V NXT2 Skid Steer Loader is every operator’s dream.

Level II FOPS is standard equipment.

Extra-large side screens combined with a low-profile lift arm design provide a wide field-of-view to the side work areas.

Fully adjustable controls and an optional air-ride seat deliver outstanding comfort.

Domed, wide-view glass door option reduces glare and provides optimal visibility to the lift arm, work tool and front work area. Large top, front window provides a clear view of the lift arm in its higher lift positions.

Controls

The 2700V NXT2 Skid Steer Loader is ergonomically designed to reduce operator fatigue and increase productivity.

T-Bar and dual-hand controls now available.

Adjustable joystick handles provide for ease of operator control with minimal of effort, to reduce fatigue.

New upper-left and upper-right instrument panels provide easy readout and switch access.

Pilot joystick controls or pilot hand/foot controls provide the ultimate in operator comfort, ease and controllability.

Photos

Highlights

  • Des Moines, Iowa
  • 2020
  • Mustang
  • Vertical Skid Steer Loaders 2700V NXT2
  • Available
  • Bucket: 70" (1778 mm)
  • to Hinge Pin - Fully Raised: 130.3" (3310 mm) | Dump Reach at Full Height: 32" (813 mm) | Rollback at Full Height: 94° | Dump Height: 100" (2540 mm)

    • Specifications

    • 2020
    • Mustang
    • Vertical Skid Steer Loaders
    • 2700V NXT2
    • General
    • Yanmar
    • 4TNV98CT - Tier IV
    • Net Power (kW): 70.7 hp (52.7) | Gross Power (kW): 72 hp (53.7)
    • RPM for Optimal Power: 2500 rpm
    • 202.6 cu.in. (3.3 L)
    • @ rpm: 217 ft.-lbs. (294 Nm) @ 1625
    • 12.00 x 16.5 HD
    • 12.00 x 16.5 HD
    • Travel Speed - Maximum: 7.4 mph (12 km/hr)
    • Auxiliary Hydraulics - Standard: 23.5 gpm (89 L/min)
    • High Flow System Pressure: 3,200 psi (220.6 bar)
    • Rollback at Ground Level: 29° | Dump Angle: 42° | Clearance Circle - Rear: 66.5" (1689 mm) | Clearance Circle - Front w/o Bucket: 56" (1422 mm) | Clearance Circle - Front w/Bucket: 90" (2286 mm) | Departure Angle: 27°
    • Overall Operating Height - Fully Raised: 167.4" (4252 mm) | to top of ROPS: 81" (2057 mm)
    • to Hinge Pin - Fully Raised: 130.3" (3310 mm) | Dump Reach at Full Height: 32" (813 mm) | Rollback at Full Height: 94° | Dump Height: 100" (2540 mm)
    • to Chassis: 8" (203 mm)
    • with Bucket: 148" (3759 mm) | without Bucket: 116.5" (2959 mm)
    • 49.5" (1257 mm)
    • 69.5" (1661 mm)
    • Bucket: 70" (1778 mm)
    • Seat to Ground Height: 40" (1016 mm)
    • Reservoir: 10.5 gal. (40 L)
    • Rated Operating Capacity: 2700 lbs. (1225 kg)
    • Tipping: 5400 lbs. (2449 kg)
    • Tank: 24.5 gal. (72.7 L)
    • Approximate: 8,150 lbs. (3697 kg)

    Disclaimer

    Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Pricing subject to change without notice. Contact dealer for details.