2020 Mustang Radial Skid Steer Loaders 1500R NXT2

Information

2020 Mustang Radial Skid Steer Loaders 1500R NXT2

Features may include:

Operator's Cab

The 1500R NXT2 features a new, state-of-the-art, fully-adjustable operator's cab.

Sound reduction material within the cab suppresses outside noise for a quieter operator environment.

A front-lifting restraint bar with integrated armrests provides personalized comfort and increased safety.

Cab forward design enhances view to the bucket edge. Lowered rear towers improve visibility to the rear of the machine.

Hydraloc™ System - Brakes and hydraulics are applied automatically whenever the operator raises the restraint bar, leaves the operator's seat or switches off the ignition.

Creature comforts include automatic dome light, cup holder, 12-volt outlet, storage tray and multiple adjustable air vents.

Controls

Hydraglide™ Ride Control now available as an option for T-Bar and Hand/Foot control choices.

Digital color display shows real time fuel consumption, engine RPM's, machine hours, engine diagnostic codes, warning indicators and much more.

All instrumentation is conveniently located in the upper-right and left instrument panels for easy access.

Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition.

Engine

The 1500R NXT2 is equipped with an all-new Yanmar Tier IV naturally-aspirated diesel engine.

Automatic glow plug heating system provides superior cold-weather starting.

After treatment meets all Tier IV requirements through proven technology.

Photos

Highlights

  • Des Moines, Iowa
  • 2020
  • Mustang
  • Radial Skid Steer Loaders 1500R NXT2
  • Available
  • Bucket: 61.5" (1562 mm)
  • to Hinge Pin - Fully Raised: 118.8" (3018 mm) | Dump Reach at Full Height: 22.8" (579 mm) | Rollback at Full Height: 99° | Dump: 93.7" (2379 mm)

    • Specifications

    • 2020
    • Mustang
    • Radial Skid Steer Loaders
    • 1500R NXT2
    • General
    • Yanmar
    • 4TNV88C-KMS Tier IV
    • Gross Power (kW) @ 2800 rpm: 46.6 (34.3) | Net Power (kW) @ 2800 rpm: 44.5 hp (33.2)
    • @ 1820 rpm: 108 ft.-lbs. (146.2 Nm)
    • 133.6 cu.in. (2.19 L)
    • 10.00 x 16.5 HD
    • 10.00 x 16.5 HD
    • Battery (CCA): 12-volt (950)
    • 12-volt (2.3 kW)
    • 100-amp
    • Travel Speed - Maximum: 7.4 mph (11.9 km/hr)
    • Auxiliary Hydraulics - Standard: 18.5 gpm (70 L/min)
    • Rollback at Ground Level: 28° | Dump Angle: 38° | Clearance Circle - Rear: 57.7" (1466 mm) | Clearance Circle - Front w/o Bucket: 45.4" (1130 mm) | Clearance Circle - Front w/Bucket: 73.6" (1869 mm) | Departure Angle: 21°
    • Overall Operating Height - Fully Raised: 152.6" (3876 mm) | to top of ROPS: 77" (1956 mm)
    • to Hinge Pin - Fully Raised: 118.8" (3018 mm) | Dump Reach at Full Height: 22.8" (579 mm) | Rollback at Full Height: 99° | Dump: 93.7" (2379 mm)
    • to Chassis: 6.3" (160 mm)
    • with 54" Bucket: 122.1" (3101 mm) | without Bucket: 93.9" (2385 mm)
    • 38.8" (986 mm)
    • Less Bucket: 62.2" (1580 mm)
    • Bucket: 61.5" (1562 mm)
    • Seat to Ground Height: 35.6" (904 mm)
    • Reservoir: 10.3 gal. (39 L)
    • Rated Operating Capacity: 1500 lbs. (680 kg)
    • Tank: 16.5 gal. (62.5 L)
    • Approximate: 5,930 lbs. (2690 kg)

    Disclaimer

    Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Pricing subject to change without notice. Contact dealer for details.