Star Equipment Ltd.

  • 1401 2nd Avenue
  • Des Moines, IA 50314
  • Call Us: (877) 267-7203
  • http://www.starequip.com/
Print This Page

2020 Mustang Radial Skid Steer Loaders 1350R NXT2

Information

2020 Mustang Radial Skid Steer Loaders 1350R NXT2

Features may include:

Operator's Cab

The 1350R NXT2 features a new, state-of-the-art, fully-adjustable operator's cab.

Sound reduction material within the cab suppresses outside noise for a quieter operator environment.

A front-lifting restraint bar with integrated armrests provides personalized comfort and increased safety.

Hydraloc™ System - Brakes and hydraulics are applied automatically whenever the operator raises the restraint bar, leaves the operator's seat or switches off the ignition.

Creature comforts include automatic dome light, cup holder, 12-volt outlet, storage tray and multiple adjustable air vents.

Controls

Digital color display shows real time fuel consumption, engine RPM's, machine hours, engine diagnostic codes, warning indicators and much more.

All instrumentation is conveniently located in the upper-right and left instrument panels for easy access.

Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition.

Engine

The 1350R NXT2 is equipped with an all-new Yanmar Tier IV naturally-aspirated diesel engine.

Automatic glow plug heating system provides superior cold-weather starting.

After treatment meets all Tier IV requirements through proven technology.

Photos

Highlights

  • Des Moines, Iowa
  • 2020
  • Mustang
  • Radial Skid Steer Loaders 1350R NXT2
  • Available
  • Bucket: 55" (1404 mm)
  • to Hinge Pin - Fully Raised: 107.5" (2731 mm) | Dump Reach at Full Height: 22.8" (579 mm) | Rollback at Full Height: 99° | Dump Height: 84.5" (2146 mm)
  • Specifications

    • 2020
    • Mustang
    • Radial Skid Steer Loaders
    • 1350R NXT2
    • General
    • Yanmar
    • 3TNV88C-KMS Tier IV
    • Gross Power (kW) @ 2800 rpm: 34.7 hp (25.5) | Net Power (kW) @ 2800 rpm: 33.1 hp (24.7)
    • @ 1820 rpm: 80.7 ft.-lbs. (109.4 Nm)
    • 100 cu. in. (1.6 L)
    • 27x8.5x15 HD
    • 27x8.5x15 HD
    • Battery (CCA): 12-volt (950)
    • 12-volt (3.0 kW)
    • 40-amp
    • Travel Speed - Maximum: 5.9 mph (9.5 km/hr)
    • Auxiliary Hydraulics - Standard: 14.5 gpm (55 L/min)
    • Rollback at Ground Level: 29° | Dump Angle: 42° | Clearance Circle - Rear: 54.1" (1374 mm) | Clearance Circle - Front w/o Bucket: 44.1" (1120 mm) | Clearance Circle - Front w/Bucket: 69.4" (1763 mm) | Departure Angle: 26°
    • Overall Operating Height - Fully Raised: 139.6" (3546 mm) | to top of ROPS: 70.3" (1786 mm)
    • to Hinge Pin - Fully Raised: 107.5" (2731 mm) | Dump Reach at Full Height: 22.8" (579 mm) | Rollback at Full Height: 99° | Dump Height: 84.5" (2146 mm)
    • to Chassis: 6.0" (152 mm)
    • with 55" Bucket: 114" (2896 mm) | Less Bucket: 88.9" (2258 mm)
    • 34.5" (876 mm)
    • Less Bucket: 48.4" (1229 mm)
    • Bucket: 55" (1404 mm)
    • Seat to Ground Height: 32.6" (828 mm)
    • Reservoir: 8 gal. (30.3 L)
    • Rated Operating Capacity: 1,050 lbs. (476 kg)
    • Tank: 10.4 gal. (39.4 L)
    • Approximate: 4,200 lbs. (1905 kg)

    Disclaimer

    Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Pricing subject to change without notice. Contact dealer for details.