Star Equipment Ltd.

  • 1401 2nd Avenue
  • Des Moines, IA 50314
  • Call Us: (877) 267-7203
  • http://www.starequip.com/
Print This Page

2020 ICS® 680ES Gas Power Cutter Base

Information

2020 ICS® 680ES Gas Power Cutter

Built to meet the operation and flexibility demands of the general construction user, the 680ES stands alone in terms of reliability and value.

Easy to start with a new multifunction lever to control choke, run, and stop functions.

The powerhead houses specially designed carburetion and ignition systems that work together for easy starting, cooler operation, and dependable performance at just about any elevation.

Available with 12 in. (30 cm) and 14 in. (35 cm) guide bars and the entire line of FORCE3® Series diamond chain.

This product can expose you to chemicals, including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Features may include:

  • Polyester air filter designed specifically for wet cutting
  • Operates FORCE3™ diamond chain consumables up to 14 in. (35cm)
  • Multifunction lever controls choke, throttle advance, run and stop modes
  • Extended drive sprocket adapter offers easy chain assembly
  • Deep cutting solution for obstructed or small openings
  • Cut squares as small as 4 in. x 4 in. (10 cm x 10 cm)
  • Easy-to-start in all weather

Photos

Highlights

  • Des Moines, Iowa
  • 2020
  • ICS®
  • 680ES Gas Power Cutter Base
  • Available
  • 25 cm (10 in)
  • 29 cm (11.5 in)
  • Specifications

    • 2020
    • ICS®
    • 680ES Gas Power Cutter
    • Base
    • General
    • 3.7 kW (5 hp) @ 9,500 rpm
    • 4.1 Nm (36.3 in-lbs) @ 6,500 rpm
    • 2-stroke
    • 76.5 cc (4.7 cu-in)
    • 11500 +/- 500 rpm (max) / 2,800 - 3,200 rpm (Idle)
    • Air Cooled
    • Dust and water resistant
    • Special water resistant electronic ignition
    • 2% (50:1) gasoline-to-oil
    • Water Supply Requirement: Minimum: 1.5 bar (20 psi)
    • Water Flow Requirement: Minimum: 4 lpm (1 gpm)
    • Chain at Maximum Power: 34.5 m/s (6800 ft /min)
    • Vibration, ahv eq Concrete Cutting (2): 7.2 m/s2 (K=1.0 m/s2) Front Handle/8.5 m/s2 (K=1.0 m/s2) Rear Handle
    • Equivalent Sound Pressure at the Operator's Ear Lwa: 101.0 dB(A) (K = 2.0 dB(A)) | Guaranteed Sound Power Level, Lwa (1): 117 dB(A) (Kwa=3.0 dB(A))
    • 46 cm (18 in)
    • 29 cm (11.5 in)
    • 25 cm (10 in)
    • 0.88 liter (0.23 gallon)
    • 9.5 kg (21 lbs)

    Disclaimer

    Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Pricing subject to change without notice. Contact dealer for details.