2020 E-Z Drill Inc. Single Drills 210B SRA Vertical

Information

2020 E-Z Drill Inc. Single Drills 210B SRA Vertical

With the 240B combo drill, you can switch between rock drilling and core drilling with a bit guide and motor change for greater versatility on jobsites. Use it to drill within a 4-foot patch, and core and drill 5/8- to 2-1/2-inch-diameter holes to 18 inches deep. The fully pneumatic drill can operate at three speeds – 400, 900 and 1,600 rpm – and requires a minimum of 77 cfm. The rock drill configuration requires 100 cfm. Both rock and core drill motors and bit guides are included with the 240B drill.

Photos

Highlights

  • Des Moines, Iowa
  • 2020
  • E-Z Drill Inc.
  • Single Drills 210B SRA Vertical
  • Available
  • 54 in (137.2 cm)

    • Specifications

    • 2020
    • E-Z Drill Inc.
    • Single Drills
    • 210B SRA Vertical
    • Directional
    • Air Consumption (minimum): 100 cfm (2.8 m 3 /min) | Impact: 36 ft. lbs. (49 blow)
    • 90 psi (6.2 bar)
    • Drill Distance From Ground: Up to 12 in (30.5 cm) | Drill Bit Diameter: 5/8 in to 2 1/2 in (15.9 mm to 63.5 mm) | Chuck Size (std.): 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm)
    • Drill: 18 in (45.7 cm)
    • Cart: 54 in (137.2 cm)
    • 73 in (185.4 cm)
    • 48 in (121.9 cm)
    • 54 in (137.2 cm)
    • 1,150 lbs (522.1 kg) | Drill Motor: 54 lbs (24.5 kg)
    • Drill Motor (pneumatic): CP 32A

    Disclaimer

    Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Pricing subject to change without notice. Contact dealer for details.