2020 E-Z Drill Inc. Single Drills 210B Horizontal

Information

2020 E-Z Drill Inc. Single Drills 210B Horizontal

Drill 5/8- to 2-1/2-inch holes 18 inches deep in a 4-foot patch with the only on-grade drill on the market with these capabilities – the 210B. It requires just 100 cfm to operate, and the dual-purpose guide wheels transition simply from on-grade positioning to easy transportation around the jobsite. With its adjustable drill height you can drill into the center of slabs that are 6 to 24 inches thick.

Photos

Highlights

  • Des Moines, Iowa
  • 2020
  • E-Z Drill Inc.
  • Single Drills 210B Horizontal
  • Available
  • 12 in (30.5 cm)
  • 30 in (76.2 cm)

    • Specifications

    • 2020
    • E-Z Drill Inc.
    • Single Drills
    • 210B Horizontal
    • Directional
    • Air Consumption (minimum): 100 cfm (2.8 m 3 /min) | Impact: 36 ft lbs (49 blow)
    • Hammer: 2200 bpm | 288 rpm
    • Operating: 90 psi (6.2 bar)
    • Drill Distance From Corner: 6 in (15.2 cm) | Drill Distance From Ground: 3 in (7.6 cm) | Diameter: 5/8 in to 2 1/2 in (15.9 mm to 63.5 mm) | Chuck Size: 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm)
    • Drill: 18 in (45.7 cm)
    • Lower: 51 3/8 in (130.5 cm) | Lower Length w/ Back Wheel Removed: 46 in (116.8 cm)
    • 12 in (30.5 cm)
    • 30 in (76.2 cm)
    • 285 lbs (129.4 kg) | Drill Motor: 54 lbs (24.5 kg)
    • Drill Motor (pneumatic): CP 32A

    Disclaimer

    Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Pricing subject to change without notice. Contact dealer for details.