2020 E-Z Drill Inc. Single Drills 110B Horizontal

Information

2020 E-Z Drill Inc. Single Drills 110B Horizontal

Achieve greater efficiency with the 110B single-gang, on-grade drill that’s equipped with dual-purpose guide wheels to quickly transition from riding along the face of the slab to moving around the jobsite. The drill operates on the subgrade and fits in a 3-foot patch. A minimum of 50 cfm is required to run the totally pneumatic system, which can drill holes as deep as 12 inches in diameters of 5/8 of an inch to 2 inches.

Photos

Highlights

  • Des Moines, Iowa
  • 2020
  • E-Z Drill Inc.
  • Single Drills 110B Horizontal
  • Available
  • 12 in (30.5 cm)
  • 29 in (73.7 cm)

    • Specifications

    • 2020
    • E-Z Drill Inc.
    • Single Drills
    • 110B Horizontal
    • Directional
    • Air Consumption (minimum): 50 cfm (1.4 m 3 /min) | Impact: 24 ft. lbs (32.6 blow)
    • Hammer: 2600 bpm | 210 rpm
    • Operating: 90 psi (6.2 bar)
    • Drill Distance From Corner: 6 in (15.2 cm) | Drill Distance From Ground: 3 in (7.6 cm) | Drill Bit Diameter: 5/8 in to 2 in (15.9 mm to 50.8 mm) | Chuck Size: 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm)
    • Drill: 12 in (30.5 cm)
    • Lower: 41 3/8 in (105.1 cm) | Lower Length w/ Back Wheel Removed: 34 3/4 in (88.3 cm)
    • 12 in (30.5 cm)
    • 29 in (73.7 cm)
    • 170 lbs (77.2 kg) | Drill Motor: 28 lbs (12.7 kg)
    • Drill Motor (pneumatic): CP 22

    Disclaimer

    Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Pricing subject to change without notice. Contact dealer for details.