2023 Digga Excavator 9T - 12T 12DDS

Information

2023 Digga Excavator 9T - 12T 12DDS

Drilling Drives for Excavators 9 ton to 12 ton

Digga's range of drilling drives for 9-12t excavators are the ultimate in performance, quality and cost effectiveness. Over 30 years of design and development has produced the highest quality range of auger drives on the market today. Completely manufactured and assembled by Digga, using only the highest grade materials and strictest quality control.

Fitted with Digga / Eaton bell motors with integrated pressure relief valve and input housing. The innovative design allows the gearbox to go down the hole to maximise drilling depth without extensions.

Available in Single Speed Std, low pressure (for machines with 3000 psi), Two Speed, and Two Speed low pressure (for machines with 3000 psi). Want to install Screw Anchors with your Drive? Absolutely, but to ensure full warranty protection, the addition of our patented ECV "Energy Control Valve" ensures complete protection against pile ‘flickback’ damaging your motor.

Features May Include:
  • Compact high torque Digga manufactured gearbox
  • Digga designed Eaton motor with integrated pressure relief valve eliminating the need for bulky valve blocks while reducing many potential leak points
  • 2 Piece shaft design ensures maximum side load ratings without increasing load on bearings
  • Lifetime shaft pull out warranty
  • 5 year gear box and 3 year motor warranty
  • Over 30 years design and manufacturing experience
  • Easily converted to a screw anchor drive with the addition of our patented 'anti kickback valve'

Photos

Highlights

  • Des Moines, Iowa
  • 2023
  • Digga
  • Excavator 9T - 12T 12DDS
  • Available

    • Specifications

    • 2023
    • Digga
    • Excavator 9T - 12T
    • 12DDS
    • General
    • Max. Horsepower: 60 hp
    • Torque: 9,893 ft-lbs @ 3000 PSI | Max. Torque: 11,542 ft-lbs @ 3500 PSI | Do not exceed: 3500 PSI @ 29 GPM
    • EATON
    • Recommended Flow: 22-48 gpm | Max. Do not exceed: 55 GPM @ 1950 PSI
    • Standard Output Shaft: 2.5" Hex | Max. Auger Diameter Clay / Shale: 36" | Max. Auger Diameter Earth: 48" | Diameter: 14.4"
    • 35.7"
    • 376 lbs.
    • Recommended Auger: A8 / RC8 | Pressure Relief Valve

    Disclaimer

    Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Pricing subject to change without notice. Contact dealer for details.