2020 Chicago Pneumatic Impact Wrenches 1/2 CP7748TL

Information

2020 Chicago Pneumatic Chicago Pneumatic CP7748TL

Torque limited in forward: 60/70 ft. Lbs. - 90/100 Nm

Full power in reverse

One Hand Operation: 2 power setting positions

Insulation & Comfort: Contoured comfort grip handle instead of TPR injected in handle

Low sound level

Suited for all light vehicle tire changing applications

Features may include:

  • 1/2" composite impact wrench with friction ring socket retainer
  • 2 setting positions : one in Reverse and one Torque Limited in forward
  • 60/70 ft. lbs. - 90/100 Nm in torque limited position in forward
  • 920 ft.lbs - 1,250Nm of maximum torque in reverse
  • Aluminum clutch & rear housings
  • Thermo-plastic rubber injected in housing - Resistant to most chemicals used in workshops
  • Universal & durable twin hammer mechanism
  • Full teasing trigger
  • 360° swivel air inlet
  • The CP7748TL series is intended to be used as a “snugging” tool prior to final tightening with a calibrated torque wrench to reach the car manufacturer’s specified torque rating for wheel assembly.
  • Torque results vary greatly depending on the type of wheel, air pressure, run time and many other factors.

Photos

Highlights

  • Des Moines, Iowa
  • 2020
  • Chicago Pneumatic
  • Impact Wrenches 1/2 CP7748TL
  • Available

    • Specifications

    • 2020
    • Chicago Pneumatic
    • Impact Wrenches 1/2
    • CP7748TL
    • General
    • Working Range: 90 - 96 Nm (66 - 70 ft.lbs)
    • Maximum (reverse): 1250 Nm (920 ft.lbs)
    • Twin Hammer
    • Free: 8200 rpm
    • Actual air consumption: 10 l/s (22 cfm) | Average air consumption: 2 1/2 l/s (5 1/2 cfm) | Vibration: 4.8 m/s² | Vibration uncertainty: 1 1/2 m/s² | Blows per minute: 850
    • Sound power: 97 db(A) | Sound pressure: 86 db(A)
    • Minimun hose size: 10 mm (3/8 ") | Air inlet thread size: 1/4 " | Square drive: 1/2 " | Side to center: 38 mm (1 1/2 ") | Box: 210x206x75 mm (8.3x2.1x3 ") | Over carton: 455x230x418 mm (17.9x9.1x16.5 ")
    • 200 mm (7.8 ")
    • Net: 2.2 kg (4.8 lb) | Power/ratio: 568.2 Nm/kg (192.1 ft.lb/lb)
    • Handle type: Pistol | Socket retainer: Friction ring

    Disclaimer

    Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Pricing subject to change without notice. Contact dealer for details.