2023 Barreto 37SGB Base

Information

2023 Barreto 37SGB

DESIGN

The 37SGB track stump grinder is a recent addition to the Barreto tree service equipment line. Designed on the reliable track drive platform used by the Barreto 30SG stump grinder, the 37SGB features a hydraulically-driven cutter wheel fitted with sixteen 900-series Green Teeth. The 37SGB is powered by a 37hp EFI Briggs & Stratton Vanguard V-Twin engine. The engine is coupled to a piston pump: the larger piston pump delivers fluid to a piston motor that drives the cutter wheel. The cylinders, lift, and swing are supplied with fluid from an auxiliary pump that is mounted to main piston pump. The tracks are driven by independent hydrostatic pumps mounted on the rear of the engine for easy access and simple linkage control. Counterbalance valves on each track drive prevent the track motors from slipping while the cutter wheel is engaged in the cutting process, even while operating on a slope. The track drive increases maneuverability around the jobsite, allowing the job to get done with increased efficiency.

CONTROLS

The cutter wheel operation and articulating arm are operated by controls mounted on the console. The cutter wheel is activated by a switch on the control stick and has a secondary safety switch to prevent accidental engagement. Back and forth movement across the stump, as well as depth of cut, are easily controlled by handles on the console, allowing for carefully controlled movement of the cutter wheel as it reduces the stump to chips.

ROI

All hydraulic drive to the cutter wheel eliminates costly belts. It also increases customer satisfaction by ensuring there is no loss of power because of a damaged belt or mechanical component. The track drive increases maneuverability around the job site, creating customer satisfaction by allowing them to get the job done with increased efficiency.

Features may include:

  • Easy controls operate the track drive and cutter wheel
  • Time-tested track design absorbs impact and provides stability
  • Center-mounted cutter wheel provides 134º head swing
  • Piston pumps coupled to the engine drive the cutter wheel, tilt, and swing
  • Counterbalance valves on each track drive prevent motors from slipping

Photos

Highlights

  • Des Moines, Iowa
  • 2023
  • Barreto
  • 37SGB Base
  • Vanguard V-Twin
  • Available
  • 35.5"
  • 49.5" | Cutting: 32"

    • Specifications

    • 2023
    • Barreto
    • 37SGB
    • Base
    • Stump
    • Vanguard V-Twin
    • 37hp
    • Briggs & Stratton
    • Ground Drive Forward: 290 ft/min | Ground Drive Reverse: 180 ft/min
    • to Head: 13.3gpm
    • Head Swing: 134˚, 99.7" arc | Total Ground Contact: 470 sq. in.
    • 49.5" | Cutting: 32"
    • head to side: 79" | head straight: 98"
    • 35.5"
    • 7.1"
    • 19.2" diameter to tooth
    • 0.97 thick, 16 green teeth
    • Cutting: 12"
    • 14 gallons
    • 1,950 lb.

    Disclaimer

    Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Pricing subject to change without notice. Contact dealer for details.